Damage is a message
When a customer sends back a pile of broken pallets, we can usually describe their operation without visiting it. Damage is not random. Each failure mode comes from a specific handling behaviour, and the proportions tell a story.
We do this diagnostically now as part of repair quoting, because fixing the cause is worth more to the customer than fixing the pallets.
Broken lead boards: approach speed
If the outermost top deck boards at one end are consistently split, forks are being driven in too fast and too high. The lead board takes the strike.
The fix is training and, sometimes, better lighting at the dock. The pattern is almost always concentrated on one shift.
Torn notches: pallet jacks on stringer pallets
Notch damage on outer stringers means pallet jacks are entering at an angle, catching the notch edge. This is the most expensive common damage because it is structural.
The real fix is specification rather than training: move that operation to block pallets with true four-way entry.
Missing bottom boards: dragging
Bottom deck boards torn off cleanly mean pallets are being dragged across the floor rather than lifted, or are freezing to a cold-storage floor and being ripped free.
Look at floor condition and at whether there is enough forklift capacity at peak. Dragging is usually a symptom of a crew in a hurry with the wrong equipment.
Crushed corner blocks: stacking height
On block pallets, crushed or split corner blocks indicate loaded stacks going higher than the pallet is rated for, or uneven loads concentrating weight on one corner.
Check your stack height policy against the published rating, and check whether loads are centred. Both are free to fix.
Diagonal racking: out-of-square storage
Pallets arriving visibly out of square, with no individual broken component, usually come from racking that is loading them diagonally — beams at slightly different heights, or pallets bridging two positions.
This one is worth chasing, because a rack loading pallets out of square is a rack that will eventually drop something.
What to do with this
Keep thirty of your own broken pallets aside for a month and photograph the damage. Patterns emerge quickly. Then fix the behaviour, not the pallet.
We will do this analysis with any repair quote, free, because a customer whose damage rate halves buys from us for a decade.
